Radiator Ferrules

Oak Radiator Ferrules


These Oak  radiator ferrules are thin and are  unobtrusive and are  sanded to a fine finish they are quick and easy to fit ,there is no need to remove the radiators to fit them.It is easier to finish the Oak radiator ferrules to the required finish prior to cracking and fitting .Unless stated they are to fit 15mm pipe and are from Ex 2″  kiln dried timber.

To fit these Oak radiator ferrules is easy to do ,the method to fit them is to snap the radiator ferrules over a steel nail or similar object.This results in the break being irregular line ,place the two halves around the pipe and glue with superglue(do not use activator as it dries white).As the joint is irregular it is almost impossible to see the joint.

hand turned oak radiator ferrules by professional woodturner Phil Jones

Hand turned oak Radiator ferrules by professional wood turner Phil Jones

 A large order of hand turned oak radiator ferrules.

A large order of hand turned Oak radiator ferrules by Phil Jones professional wood turner.


Oak Radiator ferrules to fit 15mm pipe UK delivery only

6 Oak radiator ferrules (3 pairs)

10 Oak Radiator ferrules (5 pairs)

20 Oak Radiator ferrules (10 pairs)

50 Oak Radiator  ferrules (25 pairs)

100 Oak Radiator ferrules (50 pairs)


When you have paid please can you email me directly at phil@acornwoodturning.co.uk    so that these can be dispatched as promptly as possible.Please note these are a made to order product and are hand turned so slight variations is to be expected.